Case Overview
This case follows a workboat and crew boat builder in South Korea that replaced imported steel and uncertified aluminum with a three-grade 5xxx marine aluminum plate programme: 5083 H116 for hull plating, 5052 H32 for deck and cabin panels, and heavy gauge 5083 for keel and structural members.
| Item | Detail |
|---|---|
| Customer | Workboat and crew boat builder in South Korea, 12 vessels per year, hulls 18 m to 32 m |
| Application | Hull plating, deck, cabin, fuel tanks, keel and structural members |
| Products supplied | 5083 H116 4x8 plate, 5052 H32 4x8 sheet, 5083 H116/H321 heavy gauge plate |
| Certification | DNV, CCS, ASTM B209, EN 485-2, EN 10204 3.1 MTC |
The Challenge
- Certification deadlock. Class surveyors required DNV or CCS certificates tied to each heat number. Local stock was offered in H111 or unknown temper with mill certificates the surveyor would not accept, so plate was rejected at pre-assembly.
- Lead time of 45 to 60 days. Hull plate arrived only after a full production cycle plus ocean freight, delaying each launch by six to eight weeks.
- Welding rework at the seams. Inconsistent temper and uncertain alloy content caused porosity and cracking along hull seams, with repair and re-testing absorbing about a third of welding hours.
- Three suppliers for one hull. Tolerances and delivery dates never matched.
The Solution: One 5xxx Marine Plate Programme
Each grade was mapped to a specific part of the vessel, so the cutting list, certification file and delivery sequence came from a single source.
| Grade and temper | Size | Where used | Why this grade |
|---|---|---|---|
| 5083 H116 | 3 to 100 mm, 1220 x 2440 mm | Hull shell, bottom plating, watertight bulkheads | Marine stabilised temper resists intergranular and exfoliation attack; yield 215 MPa min, tensile 305 to 385 MPa, elongation 12% min for hull curvature |
| 5052 H32 | 1 to 25 mm, 1220 x 2440 mm | Deck, cabin, superstructure, fuel tanks | Best balance of formability and strength among non heat treatable grades; yield 193 MPa min, welds cleanly with ER5356 |
| 5083 H116 / H321 | 8 to 260 mm | Keel, engine bed, structural brackets | Stable properties through thick sections, ultrasonic tested |
Specification Highlights
| Property | 5083 H116 hull plate |
|---|---|
| Alloy | EN AW 5083 / AlMg4.5Mn |
| Mechanical | Yield 215 MPa min, tensile 305 to 385 MPa, elongation 12% min |
| Standards | ASTM B209, EN 485-2, GB/T 3880 |
| Certification | DNV, CCS, MTC EN 10204 3.1 with heat number traceability |
| Processing | Waterjet, plasma and CNC cutting, beveling, drilling, PVC film |
Results Across Three Vessel Sets
| Metric | Before | After | Change |
|---|---|---|---|
| Hull plate lead time | 45 to 60 days | 12 days | About 70% shorter |
| Plate rejected at survey | 2 to 3 sheets per hull | Zero | First-pass acceptance |
| Welding rework hours | Baseline | Down 30% | Fewer seam repairs |
| Structural weight versus steel | Steel hull blocks | Aluminum hull blocks | About 18% lighter |
| Suppliers per hull | 3 traders | 1 programme | One certification file |
Why the Programme Worked
- Certification shipped with the plate. DNV and CCS documents matched to the heat number let the surveyor sign off at goods-in instead of holding the hull block.
- 4x8 stock plus cut to size. Standard cutting lists converted directly, while waterjet and CNC cutting delivered curved strakes ready for fit-up.
- One alloy family, one welding procedure. 5083 and 5052 weld with ER5183 and ER5356 under a single qualified procedure, simplifying welder qualification.
- Export packing and low entry cost. ISPM 15 pallets survived the humid coastal transit to Busan, and a 2 ton starting order with free samples let the yard validate temper first.
Procurement Manager, boat building yard
Talk to Us About Your Vessel
We supply 5083 H116, 5083 H321, 5052 H32, 5086 and 5754 marine aluminum plate in 4x8 sheet and heavy gauge, with DNV, CCS, ABS and LR certification on request.

