Self Cleaning PVDF Mirror Aluminum Sheet 1050 3003 0.3-3mm Weather UV Resistant Cladding

Self cleaning nano PVDF mirror aluminum sheet is a mirror polished aluminum sheet finished with a nano self-cleaning PVDF coating, combining a bright mirror surface with a protective exterior-grade film. The nano coating uses the lotus effect to make dust, water and dirt roll off the surface, so exterior cladding and curtain walls stay clean and reflective with far less maintenance.

The mirror surface delivers 85 to 95 percent reflectivity for a true mirror finish, while the PVDF fluorocarbon layer provides strong weather resistance and UV resistance. The sheet resists rain, salt, humidity and sunlight without fading, chalking or losing gloss, suitable for long term outdoor use where color and brightness must stay stable.

We manufacture this mirror aluminum sheet from 1050, 1060 and 3003 alloys with thickness from 0.3 mm to 3.0 mm. Popular sizes are kept in stock for fast delivery, with flexible low MOQ for trial orders and stable volume for repeat projects.

• Self Cleaning: nano PVDF lotus-effect surface repels water, dust and dirt
• Weather Resistant: stable performance in rain, humidity and coastal salt air
• UV Resistant: resists sunlight fading and chalking for long outdoor life
• Mirror Finish: 85 to 95 percent reflectivity mirror polished surface
• PVDF Coating: exterior-grade fluorocarbon layer, low maintenance
• Alloy Grade: 1050, 1060, 3003 aluminum
• Thickness: 0.3 to 3.0 mm, width up to 1500 mm
• Corrosion Resistant: resists oxidation and moisture
• Certification: ISO 9001:2015, ASTM B209, SGS
• Extra Service: free samples, cut to size and third-party inspection

• Exterior wall cladding and curtain wall panels
• Building facade decoration and architectural design
• Outdoor signage, billboards and light boxes
• Self cleaning decorative panels for high traffic areas
• Elevator interiors and display cabinets
• Roofing and awning reflective panels

We support customization of alloy grade, temper, thickness, width, length and nano PVDF coating color. Standard 4 x 8 ft self cleaning mirror aluminum sheet can be cut, sheared or bent to your required dimensions, and bright or color coated finishes are available.

OEM cutting, punching, bending and branding with your own logo and shipping marks are supported for repeat orders, with flexible MOQ and fast sample turnaround.

Our technical team helps you select the right alloy and coating for exterior cladding, signage or decorative use, and confirms the reflectivity and nano coating that best match your durability requirement. Mill test certificates, material certificates and third-party inspection reports such as SGS are supplied to support factory audit and customs clearance.

Strict full-batch quality control guarantees stable alloy composition, coating thickness, reflectivity and flatness. Our after-sales team responds quickly and offers long term technical consultation.

Each bundle of self cleaning nano PVDF mirror aluminum sheet is protected with PVC film, moisture-proof paper and PE film, then packed onto seaworthy export wooden pallets or steel-framed crates with edge protectors.

Reinforced packing prevents scratches, coating damage and edge damage during long ocean transportation. Clear shipping marks and complete cargo documents are provided for smooth customs clearance.

Q1: What makes this sheet truly self-cleaning?
The surface carries a nano PVDF coating that forms a lotus-effect micro-structure with a water contact angle above 100 degrees. Rain and water simply bead up and roll off, carrying dust and dirt away, so the mirror finish stays bright with minimal manual cleaning.

Q2: Which alloy and thickness should I choose for exterior cladding?
For exterior cladding we normally recommend 3003 or 3004 alloy in H14 or H24 temper, 0.5 - 1.5 mm thick, because it offers a good balance of strength, formability and corrosion resistance. Our engineers will confirm the best combination for your project free of charge.

Q3: How is the weather and UV resistance verified?
Every production batch is tested with salt spray (over 1000 h, ASTM B117) and accelerated UV QUV (over 2000 h). These tests confirm the coating does not fade, chalk or lose gloss under long term outdoor exposure.

Q4: Are you a factory or a trading company?
We are a direct manufacturer with our own rolling, polishing and coil coating lines, not a trading company. This means you buy at factory-direct prices, get full control over lead time and can request on-site or third-party inspection at any time.

Q5: What is your monthly production capacity and supply stability?
Our monthly capacity exceeds 5000 tons, supported by stable raw material supply and multiple production lines. We can handle both small sample orders and long term repeat programs without delivery risk.

Q6: Can you produce custom sizes, colors and coatings?
Yes. We support OEM and ODM for alloy, temper, thickness, width, length, edge type and nano PVDF color. You can send drawings or samples and we will produce to your exact specification, including your own logo and shipping marks.

Q7: Can I get a free sample before placing an order?
Yes, free samples are available for evaluation; you only pay the freight. You can check the self-cleaning effect, reflectivity and coating quality before committing to a mass order.

Q8: What is your MOQ and delivery time?
Our MOQ is flexible, starting from 1 ton for trial orders. Popular stock sizes ship in 7 - 20 working days, and custom production is normally completed within 15 - 25 working days.

Q9: What quality documents and certifications do you provide?
We provide ISO 9001:2015, SGS and RoHS certificates, mill test certificates, material certificates and third-party inspection reports, fully supporting factory audits and customs clearance.

Q10: How can I get an accurate quotation quickly?
Send us your alloy, temper, thickness, width, length, finish and quantity requirements now, and our export team will reply with a detailed quotation and free samples within 24 hours. Contact us today to start your project.