Color Coated Stucco Embossed Aluminum Sheet PVDF 25 Micron Corrosion Resistant 0.2-3mm for HVAC Jacketing

Our Color Coated Stucco Embossed Aluminum Sheet is produced from premium 1050, 1060, 1100, 3003, 3004, 3105, 5005, 5052 and 5754 aluminum alloys, then textured with a uniform stucco (orange peel) embossed pattern and finished with a PE, HDP, PVDF, FEVE or SMP coating system on a continuous coil coating line. It is engineered for HVAC insulation jacketing, refrigerator and freezer liners, roofing, wall cladding, ceiling and column decoration, and signage.

Combining a 25 micron triplex fluorocarbon (PVDF) coating with a 20-year outdoor warranty, the sheet delivers excellent weather, UV and salt-spray resistance, strong anti-corrosion performance and high color fastness even in coastal and high-humidity environments. The raised stucco texture increases surface rigidity and slip resistance without adding weight, while the light-gauge aluminum body keeps overall weight low for easy handling and fast installation. Thickness from 0.2mm to 3.0mm and width from 100mm to 1600mm are fully customizable to your tooling.

Produced in our Henan factory under strict EN573-1, ASTM B209 and GB/T 3880 quality control, every sheet is weldable and formable for bending, punching and fabrication, and is available with a free color sample for buyers to verify coating adhesion, gloss, color and emboss quality.

• PVDF / PE / HDP / FEVE / SMP color coating with 25 micron triplex film and up to 20-year outdoor warranty
• Stucco (orange peel) embossed texture improves surface rigidity, anti-slip performance and decoration value
• Excellent corrosion resistance: salt-spray tested and suitable for coastal and high-humidity use
• Anti-corrosion and weather resistant for HVAC insulation jacketing and vapor barrier applications
• Light-weight aluminum body reduces transport cost and speeds up on-site installation
• Good weldability and workability for bending, punching, cutting and deep fabrication
• Moisture-proof and anti-aging surface, ideal as refrigerator and freezer liner panel

• HVAC insulation jacketing, vapor barrier and pipe/duct thermal insulation cladding
• Refrigerator liner, chest freezer and appliance interior panel
• Roofing sheet, wall cladding, building facade and column cladding
• Ceiling, decorative panel, feature wall and interior decoration
• Signage, gutter, ACP and general industrial fabrication

Every Color Coated Stucco Embossed Aluminum Sheet is produced in our own factory with 23 years of aluminum deep-processing experience, using certified raw material from tier-one domestic smelters and a full DC hot rolling plus CC cold rolling line. Quality is controlled at every stage rather than only at the end.

• Incoming raw material inspection on chemical composition and mechanical properties, with traceable heat and batch numbers
• Precision embossing rollers produce a uniform, repeatable stucco texture with consistent pattern height and no orange-peel tearing
• In-line thickness, width and flatness gauges keep dimensional tolerance tight throughout the coil coating and embossing process
• Coating performance tested by film thickness gauge, cross-hatch adhesion, impact and bending test, gloss meter and MEK rub resistance
• Salt-spray and UV aging tests verify corrosion resistance and color fastness for coastal and high-humidity applications
• Batch Certificate of Analysis (COA) issued for each shipment; third-party inspection by SGS or BV supported
• Manufactured and inspected to EN573-1, ASTM B209 and GB/T 3880 international standards

As a direct manufacturer we welcome OEM and ODM orders and can tailor almost every parameter to your drawing, tooling or brand.

• Alloy: 1050, 1060, 1100, 3003, 3004, 3105, 5005, 5052, 5754 and other grades on request
• Temper: O, H12, H14, H16, H18, H22, H24, H26, H112 to match strength and forming requirements
• Dimension: thickness 0.2mm - 3.0mm, width 100mm - 1600mm, custom width, length and slit-to-size
• Pattern: stucco / orange peel, pebble, diamond, 5-bar, 3-bar, wood grain and hammer tone; custom embossing roller available
• Coating: PE, HDP, PVDF, FEVE, SMP with adjustable coating thickness, RAL / Pantone or full custom color matching
• Form: coil, sheet or cut-to-length panel, with protective film and your own logo or brand printed on request
• Packaging: custom export pallets, private-label cartons and buyer-specific loading plans

• Free sample available (freight collect) so buyers can verify coating adhesion, gloss, color and emboss quality before ordering
• Fast technical quotation within 24 working hours, with alloy, coating and pattern recommendations for your application
• Application guidance for HVAC jacketing, refrigerator liner, roofing, cladding, ceiling and signage projects
• Dedicated sales engineer plus after-sales service, with production and shipment tracking updates
• Container loading optimization and mixed-container service to reduce freight cost for multiple items
• Full export documentation: COA, packing list, commercial invoice, certificate of origin and MSDS
• Third-party inspection (SGS, BV) and factory audit arrangements welcomed

Each sheet is packed with protective film, moisture-proof paper and edge protectors, then loaded on export wooden pallets or in seaworthy export packing with steel strapping. Standard delivery is 7-15 days after deposit; flexible payment terms and container loading plans are provided for bulk orders.