The 5A02 aluminum plate is an Al-Mg series rust-proof aluminum alloy, which cannot be strengthened by heat treatment. The alloy has low magnesium content, high plasticity, good formability, good weldability, and cold deformation can improve its strength. The alloy has good corrosion resistance and is suitable for use in marine environments.
The Performance Advantages of Yongsheng 5A02 Aluminum Plate
1. The plasticity of 5A02 alloy aluminum plate is higher, but the strength is lower, and its corrosion resistance and weldability are good;
2. 5a02 aluminum alloy plate has good corrosion resistance and is suitable for use in marine environment;
3. Yongsheng strictly controls the production process of 5A02 aluminum plate. Through the determination of alloy composition, optimization of melting and casting process, homogenization heat treatment and rolling process, the quality of 5a02 aluminum plate produced is guaranteed, and the reputation and credibility are high.
5A02 Aluminum Plate Manufacturer
Yongsheng supplies 5a02 medium-thick aluminum plate, 5a02 aluminum alloy sheet and other products in different states and different specifications. Yongsheng 5a02 aluminum plate manufacturer, supplying 5a02 aluminum plate with a width of 0.1-500mm and a width of 20-2650mm. The manufacturer mainly produces customized production. The delivery time is 2-25 days. It is exported to more than 100 countries and regions, and has a high reputation.
Market Application
The alloy has good corrosion resistance and is suitable for use in marine environments. It is also suitable for welded structures and containers with high process plasticity requirements and good corrosion resistance, such as fuel tanks, gasoline and lubricating oil conduits, nails, flanges, and Light-loaded parts, interior trim parts of ships, vehicles, etc., wire rods are used as rivets or electrodes.
| ALLOY | 5A02 Aluminum Plate |
| Aluminum Plate |
F,O,H12,H14, H16,H18,H19, H22,H24,H26, H28,H32,H34, H36,H38,H111, H112,H114 |
| Thickness(mm) | 0.1-500 |
| Width(mm) | 100-2650 |
| Length(mm) | 500-16000 |
| Typical Product | Sheet metal parts, fuel tanks, flanges, etc. |
